Product Description
The Series 1000—2 WIRE range of Conventional Fire Alarm Control Panels are designed to conform to BS 5839 Part 4 . Available in a standard range from 2 to 24 zones each with internal power supply and space for Sealed Lead acid Batteries . The internal power supply can be supplied from 3 ratings :- 1.25 Amp , 3 Amp or 5 Amp .
The panels are housed in an attractive metal enclosure with all user controls and indications located on the front fascia together with clear operating instructions . A bezel can be fitted to the back Box to enable the control panel to be flush mounted . Special Colours or non standard finishes are available to special order .
The series 1000—2 WIRE control panels allow for connection of each zone with Detectors , Call points and Sounders Utilising only 2 Wires . Call points must have fitted a Series resistor and polarised ( blocking diode ) . Standard Detectors can be used with specially adapted bases ( available from Detector Manufactures ) . Standard Polarised Alarm Sounders are used . A End of Line Resistor ( 5k6 ) is fitted at the Last Device . Each zone has an Internal Isolate switch together with Jumper Links to provided for conventional four wire connection . Two Common monitored Sounder Outputs are provided for this facility .
Ample cable entries are provided at the top of the enclosure and removable chassis plates are provided on the larger Panels . The Electronics are based upon a system of “ Motherboards “ with plug-in modules allowing customising of the panel to the site requirements .